二(三羟甲基丙烷)四丙烯酸(DITMPTA)
DI(TRIMETHYLOLPROPANE) TETRAACRYLATE
CAS: 94108-97-1
Molecular Formula: C24H34O9
二(三羟甲基丙烷)四丙烯酸(DITMPTA) - Names and Identifiers
二(三羟甲基丙烷)四丙烯酸(DITMPTA) - Physico-chemical Properties
| Molecular Formula | C24H34O9 |
| Molar Mass | 466.52 |
| Density | 1.101g/mLat 25°C(lit.) |
| Boling Point | 540.4±50.0 °C(Predicted) |
| Flash Point | >230°F |
| Storage Condition | Room Temprature |
| Refractive Index | n20/D 1.479(lit.) |
二(三羟甲基丙烷)四丙烯酸(DITMPTA) - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 43 - May cause sensitization by skin contact |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. |
| WGK Germany | 3 |
| HS Code | 29161290 |
二(三羟甲基丙烷)四丙烯酸(DITMPTA) - Introduction
DI(TRIMETHYLOLPROPANE) TETRAACRYLATE is an organic compound commonly referred to as BDDMA.
Nature:
-Appearance: Colorless to light yellow liquid
-Molecular formula: C20H34O5
-Molecular weight: 354.48g/mol
-Melting point:-20 ° C
-Boiling point: 345 ° C
-Density: 1.04 g/mL
-Insoluble: water, can be dissolved in organic solvents
Use:
- BDDMA is commonly used as a crosslinking agent, adhesive and modifier in photosensitive curing and textile treatment.
-In lithography, it can be used as a crosslinking agent in photoresist for the production of electronic devices, displays and microelectronic devices.
- BDDMA can also be used as a ligand and plays an important role in catalyst preparation and organic synthesis.
Preparation Method:
- BDDMA has many preparation methods. One of the common methods is to combine 1,4-dihydroxybutane (1,4-butanediol) with 2-hydroxypropyl acrylate (Ni), the product was then obtained by transesterification with methyl methacrylate.
Safety Information:
- BDDMA is a flammable liquid, avoid exposure to open flames and high temperatures.
-Avoid inhalation, ingestion or contact with skin or eyes during use.
-In case of accidental contact, flush the affected area immediately with plenty of water and seek medical attention immediately.
-When storing and handling, follow safe operating procedures, wear protective gloves and goggles, and maintain a well-ventilated work area.
Nature:
-Appearance: Colorless to light yellow liquid
-Molecular formula: C20H34O5
-Molecular weight: 354.48g/mol
-Melting point:-20 ° C
-Boiling point: 345 ° C
-Density: 1.04 g/mL
-Insoluble: water, can be dissolved in organic solvents
Use:
- BDDMA is commonly used as a crosslinking agent, adhesive and modifier in photosensitive curing and textile treatment.
-In lithography, it can be used as a crosslinking agent in photoresist for the production of electronic devices, displays and microelectronic devices.
- BDDMA can also be used as a ligand and plays an important role in catalyst preparation and organic synthesis.
Preparation Method:
- BDDMA has many preparation methods. One of the common methods is to combine 1,4-dihydroxybutane (1,4-butanediol) with 2-hydroxypropyl acrylate (Ni), the product was then obtained by transesterification with methyl methacrylate.
Safety Information:
- BDDMA is a flammable liquid, avoid exposure to open flames and high temperatures.
-Avoid inhalation, ingestion or contact with skin or eyes during use.
-In case of accidental contact, flush the affected area immediately with plenty of water and seek medical attention immediately.
-When storing and handling, follow safe operating procedures, wear protective gloves and goggles, and maintain a well-ventilated work area.
Last Update：2024-04-10 22:29:15
