三(4-溴苯基)六氯锑酸铵

三(4-溴苯基)六氯锑酸铵 - Names and Identifiers

Name	4-bromo-N,N-bis(4-bromophenyl)anilinium chloride - pentachloro-lambda~5~-stibane (1:1)
Synonyms	TRIS(4-BROMOPHENYL)AMINIUM HEXACHLORO-AN TRIS(4-BROMOPHENYL)AMINIUM HEXACHLOROANTIMONATE TRIS(4-BROMOPHENYL)AMMONIUMYL HEXACHLOROANTIMONATE
CAS	24964-91-8
InChI	InChI=1/C18H12Br3N.6ClH.Sb/c19-13-1-7-16(8-2-13)22(17-9-3-14(20)4-10-17)18-11-5-15(21)6-12-18;;;;;;;/h1-12H;6*1H;/q+1;;;;;;;+5/p-6/rC18H12Br3N.Cl5Sb.ClH/c19-13-1-7-16(8-2-13)22(17-9-3-14(20)4-10-17)18-11-5-15(21)6-12-18;1-6(2,3,4)5;/h1-12H;;1H/q+1;;/p-1

三(4-溴苯基)六氯锑酸铵 - Physico-chemical Properties

Molecular Formula	C18H13Br3Cl6NSb
Molar Mass	817.49
Melting Point	142 °C (dec.) (lit.)
Appearance	solid
Storage Condition	Room Temprature
Stability	Light and moisture sensitive. Incompatible with strong oxidizing agents.

三(4-溴苯基)六氯锑酸铵 - Risk and Safety

Risk Codes	R20/22 - Harmful by inhalation and if swallowed. R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Safety Description	61 - Avoid release to the environment. Refer to special instructions / safety data sheets.
UN IDs	UN 3077 9/PG 3
WGK Germany	2
FLUKA BRAND F CODES	9-23
HS Code	29239000

三(4-溴苯基)六氯锑酸铵 - Introduction

4-bromo-N,N-bis(4-bromophenyl) aniline chloride-pentachloro-lambda ~ 5 ~-stibane (1:1) is an organic antimony compound with the chemical formula C12H8Br2N · SbCl5. The following is a description of the properties, uses, preparation and safety information of the compound:

Nature:
1. Appearance: 4-bromo-N,N-bis(4-bromophenyl) aniline chloride-pentachloro-lambda ~ 5 ~-stibane (1:1) is colorless crystal powder or crystal.
2. Solubility: It is almost insoluble in water and soluble in organic solvents such as chloroform, ether and benzene.
3. Stability: The compound is relatively stable at room temperature.

Use:
1. 4-bromo-N,N-bis(4-bromophenyl)anilinium chloride-pentachloro-lambda ~ 5 ~-stibane (1:1) can be used as potential photoelectric materials and nonlinear optical materials.
2. It can also be used as a functional material in electrochromic polymer materials and organic photoelectric devices.

Method:
4-bromo-N,N-bis(4-bromophenyl)anilinium chloride-pentachloro-lambda ~ 5 ~-stibane (1:1) is usually synthesized by chemical reaction, the specific steps are as follows:
1. First, 4-bromoaniline is reacted with a certain amount of benzomagnesium bromide to produce N,N-di (4-bromophenyl) aniline compound.
2. Then, the above compound is reacted with benzo-antimony bromide to form a tris (4-bromophenyl) antimony compound.
3. Finally, the tris (4-bromophenyl) antimony compound is reacted with hydrogen chloride to generate 4-bromo-N,N-bis(4-bromophenyl) ilinium chloride-pentachloro-lambda ~ 5 ~-stibane (1:1).

Safety Information:
1. 4-bromo-N,N-bis(4-bromophenyl)anilinium chloride-pentachloro-lambda ~ 5 ~-stibane (1:1) is an organic compound that requires careful handling.
2. In operation and use, must comply with laboratory safety practices.
3. Avoid contact with eyes, skin and inhalation of its dust or vapor.
4. After operation, thoroughly clean contaminated containers and equipment.

Please note that this is only a brief introduction, not exhaustive information, please further understand and ensure safe operation before actual use.

Last Update：2024-04-10 22:29:15