rimethoxy(3-pyrrol-1-ylpropyl)silane - Names and Identifiers
rimethoxy(3-pyrrol-1-ylpropyl)silane - Physico-chemical Properties
Molecular Formula | C10H19NO3Si
|
Molar Mass | 229.35 |
Density | 1.017 |
Boling Point | 105 °C |
Flash Point | >100°C |
Vapor Presure | 0.04mmHg at 25°C |
Specific Gravity | 1.017 |
Storage Condition | Room Temprature |
Sensitive | 7: reacts slowly with moisture/water |
Refractive Index | 1.4630 |
rimethoxy(3-pyrrol-1-ylpropyl)silane - Risk and Safety
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
TSCA | No |
rimethoxy(3-pyrrol-1-ylpropyl)silane - Introduction
N-(3-Trimethoxyylpropyl) pyrrole is an organic compound with the chemical formula C12H21NO3Si. It is a compound having a pyrrole group and a silane group. The following is an introduction to some of its properties, uses, methods and safety information:
Nature:
-Appearance: Common light yellow to brown liquid.
-Odor: There is a special aromatic smell.
-Melting point: about -70 ℃.
-Boiling point: about 265 ℃.
-Solubility: Soluble in organic solvents, such as alcohols, ethers and esters.
Use:
N-(3-Trimethoxysilylpropyl)pyrrole is a commonly used silicone reagent with the following applications:
-Surface modifier: It can be used in the synthesis of surfactants and has excellent properties for improving adhesion, wettability and weather resistance.
-Dye material: It can be used as a precursor or catalyst for dyes, used in the fields of dyeing, dye fixation and photosensitive materials.
-Polymer materials: can be used to synthesize or modify polymers, including improving the thermal stability and bonding properties of polymers.
-Optoelectronic devices: It can be applied to optoelectronic devices such as solar cells, organic light-emitting diodes (OLED) and organic field effect transistors (OFET).
Preparation Method:
The preparation of N-(3-Trimethoxysilylpropyl)pyrrole can be carried out by the following steps:
1. React 3-aminopropyltrimethoxysilane with pyrrole in a suitable solvent, usually under an inert atmosphere, to produce N-(3-Trimethoxysilylpropyl)pyrrole.
2. Through appropriate extraction and purification methods, the desired product can be obtained.
Safety Information:
-Eyes: May be irritating to the eyes. Rinse with plenty of water for at least 15 minutes immediately after contact, and seek medical attention if necessary.
-Skin: May be irritating to the skin, rinse with soap and water immediately after contact.
-Inhalation: May be irritating to the respiratory tract, avoid inhaling its vapor or spray. If you feel unwell, you should immediately move to fresh air.
-Ingestion: If ingested by accident, seek medical attention immediately.
Although the toxicity of N-(3-Trimethoxysilylpropyl)pyrrole is relatively low, you should still pay attention to safety during use, and follow appropriate operating procedures and personal protective measures. Please refer to the specific chemical safety data sheet (SDS) and the safety instructions provided by the supplier when using.
Last Update:2024-04-10 22:29:15