Triethoxy(pentafluorophenyl)silane - Names and Identifiers
Triethoxy(pentafluorophenyl)silane - Physico-chemical Properties
Molecular Formula | C12H15F5O3Si
|
Molar Mass | 330.32 |
Density | 1.242g/mLat 25°C(lit.) |
Boling Point | 69°C0.07mm Hg(lit.) |
Flash Point | 219°F |
Vapor Presure | 0.0449mmHg at 25°C |
Specific Gravity | 1.24 |
Storage Condition | 2-8℃ |
Sensitive | 7: reacts slowly with moisture/water |
Refractive Index | 1.4180 |
Triethoxy(pentafluorophenyl)silane - Risk and Safety
Hazard Symbols | Xi - Irritant
|
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
WGK Germany | 3 |
TSCA | No |
Hazard Note | Irritant |
Triethoxy(pentafluorophenyl)silane - Introduction
It is an organic silicon compound. Its chemical formula is C8H9F5SiO3, and its structure contains a silicon atom and three ethoxy groups, as well as a pentafluorophenyl group. The following is an introduction to its nature, use, preparation and safety information:
Properties: It is a colorless liquid, insoluble in water at room temperature, but soluble in organic solvents such as ethanol and ether. It has good stability and chemical inertness.
Uses: It is often used as an intermediate for organic silicon compounds. Because of its pentafluorophenyl group, it has good hydrophobicity and high temperature resistance, so it can be used to improve the interfacial properties and weather resistance of polymers, coatings, rubber and other materials.
preparation method: usually obtained by the reaction of pentafluorobenzene boric acid and triethoxysilyl chloride. The detailed steps of the specific preparation method require laboratory synthesis or special equipment production.
safety information: belongs to chemicals, should pay attention to safety when using. It is irritating and may cause irritation and damage to the eyes, skin and respiratory system. Wear protective glasses, gloves and respiratory protective equipment to avoid contact with skin and eyes. Avoid inhaling its vapors or dust. During use or storage, please pay attention to fire and explosion prevention, and ensure a well-ventilated working environment. In case of inhalation or contact, immediately remove contaminated clothing from the source, flush the affected area with plenty of water, and seek medical advice and treatment.
Last Update:2024-04-10 22:29:15