Quaternary ammonium compounds, di-C14-18-alkyldimethyl, chlorides
Quaternary ammonium compounds, di-C14-18-alkyldimethyl, chlorides
CAS: 68002-59-5
Molecular Formula: C34H72ClN
Quaternary ammonium compounds, di-C14-18-alkyldimethyl, chlorides - Names and Identifiers
Quaternary ammonium compounds, di-C14-18-alkyldimethyl, chlorides - Physico-chemical Properties
| Molecular Formula | C34H72ClN |
| Molar Mass | 530.39518 |
Quaternary ammonium compounds, di-C14-18-alkyldimethyl, chlorides - Determination of CMC value of aqueous solution of BIS-octyldimethylammonium chloride
from Baidu Library
Author:
Qin Xiaoqin , waiting for Daqing , Gao Chunguang Zhao Yongxiang
Abstract:
The critical micelle concentration (CMC) of the cationic surfactant-dioctaalkyl dimethyl ammonium chloride (DODAC) was determined by conductivity and fluorescence methods, the critical micelle concentration (CMC) of DODAC solution was measured to be 5.24 × 10 ^-5mol/L by conductivity method and 9.67 × 10 ^-5mol/L by fluorescence method.
Key words:
dicetyl dimethyl ammonium chloride (DODAC) critical micelle concentration (CMC) conductance method fluorescence method
DOI:
10.3969/j.issn.1000-0720.2007.02.011
cited:
year:
2007
Last Update：2024-01-02 23:10:35
Quaternary ammonium compounds, di-C14-18-alkyldimethyl, chlorides - Properties of aqueous solution of BIS-octyldimethyl ammonium chloride
from VIP
Author:
Guo Yuguang , Zhao Na , Noble , Liu Honglai
Abstract:
The size, morphology and rheological properties of micelles in aqueous solution of dioctaalkyl dimethyl ammonium chloride (TA-100) were studied by means of dynamic light emission, transmission electron microscopy and rheometer, the liquid crystal texture of the anisotropic aqueous solution formed by TA-100 surfactant was observed by polarized light microscopy. It is found that the average particle size of surfactant aggregates in solution and the rheological properties of solution change regularly with the mass fraction of surfactant, TA-100 itself two relatively long hydrophobic chain leads to the formation of the aggregate hydrophobic effect is strong, is conducive to further orderly arrangement, this results in the formation of cruciferous lamellar liquid crystals with low surfactant mass fraction.
Key words:
Di-decatyl dimethyl ammonium chloride LCD microstructure rheology
DOI:
10.3724/SP.J.1004.2013.00371
cited:
year:
2011
Last Update：2023-08-16 22:09:50
Quaternary ammonium compounds, di-C14-18-alkyldimethyl, chlorides - Introduction
Quaternary ammonia compounds, di-C14-18-alkyldimethyl, chloride is a Quaternary ammonium compound with the chemical formula [(C18H37)(CH3)2N]Cl. Its properties are as follows:
1. Appearance: colorless or light yellow liquid;
2. Solubility: soluble in water, alcohol and ammonia and other solvents;
3. Stability: relatively stable, but may decompose under strong acid, strong alkali and dark;
4. Toxicity: low toxic substances, but long-term exposure may be harmful to health.
Quaternary ammonia compounds, di-C14-18-alkyldimethyl, chlorides are mainly used in the following aspects:
1. Preservatives: can be added to coatings, cleaners, wood preservatives and other products to improve its antibacterial and corrosion resistance;
2. Surfactant: can be used as foaming agent and emulsifier in detergent, hand sanitizer, shampoo and other products;
3. Bactericide: can be used in disinfectants, sanitary products, etc., with a strong bactericidal effect.
Quaternary ammonia compounds, di-C14-18-alkyldimethyl, chlorides are mainly prepared by the synthesis reaction of Quaternary ammonium compounds. One commonly used method of preparation is the reaction of cetyl ammonium dibromide with octadecyl ketone to produce the desired product.
Pay attention to the following safety information when using Quaternary ammonia compounds, di-C14-18-alkyldimethyl, chlorides:
1. Avoid direct contact with skin and eyes. If there is contact, rinse immediately with plenty of water;
2. Avoid inhalation of its vapor, should be used in a well-ventilated place;
3. Use should wear protective gloves and goggles and other personal protective equipment;
4. Storage should be away from fire and organic matter, to prevent contact with strong acid, alkali and other substances.
Please use this chemical in accordance with the correct method and safety requirements, and follow the relevant local regulations.
1. Appearance: colorless or light yellow liquid;
2. Solubility: soluble in water, alcohol and ammonia and other solvents;
3. Stability: relatively stable, but may decompose under strong acid, strong alkali and dark;
4. Toxicity: low toxic substances, but long-term exposure may be harmful to health.
Quaternary ammonia compounds, di-C14-18-alkyldimethyl, chlorides are mainly used in the following aspects:
1. Preservatives: can be added to coatings, cleaners, wood preservatives and other products to improve its antibacterial and corrosion resistance;
2. Surfactant: can be used as foaming agent and emulsifier in detergent, hand sanitizer, shampoo and other products;
3. Bactericide: can be used in disinfectants, sanitary products, etc., with a strong bactericidal effect.
Quaternary ammonia compounds, di-C14-18-alkyldimethyl, chlorides are mainly prepared by the synthesis reaction of Quaternary ammonium compounds. One commonly used method of preparation is the reaction of cetyl ammonium dibromide with octadecyl ketone to produce the desired product.
Pay attention to the following safety information when using Quaternary ammonia compounds, di-C14-18-alkyldimethyl, chlorides:
1. Avoid direct contact with skin and eyes. If there is contact, rinse immediately with plenty of water;
2. Avoid inhalation of its vapor, should be used in a well-ventilated place;
3. Use should wear protective gloves and goggles and other personal protective equipment;
4. Storage should be away from fire and organic matter, to prevent contact with strong acid, alkali and other substances.
Please use this chemical in accordance with the correct method and safety requirements, and follow the relevant local regulations.
Last Update：2024-04-10 22:29:15
Supplier List
Product Name: Quaternary ammonium compounds, di-C14-18-alkyldimethyl, chlorides Request for quotation
CAS: 68002-59-5
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
CAS: 68002-59-5
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
Product Name: Quaternary ammonium compounds, di-C14-18-alkyldimethyl, chlorides Request for quotation
CAS: 68002-59-5
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
CAS: 68002-59-5
Tel: 0086-551-65418684
Email: sales@tnjchem.com
info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
View History