BIS-(DIETHYLAMINO)PHOSPHOCHLORIDATE

BIS-(DIETHYLAMINO)PHOSPHOCHLORIDATE - Names and Identifiers

Name	tetraethylphosphorodiamidic chloride
Synonyms	BIS-(DIETHYLAMINO)PHOSPHOCHLORIDATE Bis(diethylamino)phosphorochloridate BIS(DIETHYLAMINO)PHOSPHOROCHLORIDATE tetraethylphosphorodiamidic chloride Tetraethylphosphorodiamidic chloride Bis(diethylamino)phosphoryl chloride Tetraethylphosphorodiamidoyl Chloride Bis(diethylamino)phosphoryl chloride, bis(diethylamino)phosphoryl chloridate Bis(diethylamino)chlorophosphine oxide N,N,N',N'-tetraethylphosphorodiamidic chloride N,N,N',N'-Tetraethyldiamidophosphoric acidchloride N,N'-[(chlorooxy)phosphanediyl]bis(N-ethylethanamine)
CAS	1794-24-7
EINECS	217-262-9
InChI	InChI=1/C8H20ClN2OP/c1-5-10(6-2)13(12-9)11(7-3)8-4/h5-8H2,1-4H3

BIS-(DIETHYLAMINO)PHOSPHOCHLORIDATE - Physico-chemical Properties

Molecular Formula	C8H20ClN2OP
Molar Mass	226.68
Density	1.07
Boling Point	101 °C (0.3 mmHg)
Flash Point	101°C/0.3mm
Vapor Presure	0.0396mmHg at 25°C
Storage Condition	0-6°C
Sensitive	Moisture Sensitive
Refractive Index	1.466-1.468

BIS-(DIETHYLAMINO)PHOSPHOCHLORIDATE - Risk and Safety

Hazard Symbols	C - Corrosive
Risk Codes	34 - Causes burns
Safety Description	S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
UN IDs	1759
HS Code	29211999
Hazard Class	8
Packing Group	II

BIS-(DIETHYLAMINO)PHOSPHOCHLORIDATE - Introduction

(Abbreviated DEAPC) is an organophosphorus compound. The following is an introduction to its nature, use, formulation and safety information:

Nature:
1. Appearance: colorless or light yellow liquid.
2. Molecular formula: C6H16ClNO2P.
3. Melting Point:-42 ℃.
4. Boiling point: 160-165 ℃.
5. Solubility: Soluble in water, alcohol and ketone.

Use:
1. DEAPC is an effective corrosion inhibitor, which can be used in metal anti-rust coatings to extend the service life of metals.
2. It can also be used as a catalyst in organic synthesis to participate in different types of reactions, such as Ester addition reactions.

Method:
The synthesis method of DEAPC is relatively simple and can usually be carried out through the following steps:
1. REACTION: combining amino diethyl alcohol with chloric acid to generate N,N-diethylamino chlorate.
2. Sintering N,N-diethylamino chlorate: sintering reaction occurs under the action of phosphorus chemical agent to generate chloride.

Safety Information:
1. DEAPC should be used in a well-ventilated place to avoid inhaling harmful gases.
2. Contact with skin or eyes, should immediately rinse with water for more than 15 minutes, and consult a doctor.
3. Avoid contact with strong oxidants and strong acids to prevent dangerous reactions.
4. Storage should be sealed and placed in a cool, dry place, away from fire and heat sources.

Please note that the use and handling of chemical substances should follow the relevant safety procedures. Follow proper laboratory practices and personal protective measures when using and handling DEAPC.

Last Update：2024-04-10 22:29:15