| Name | Adhesive |
| Synonyms | adhesive 707 Adhesive |
| Physical and Chemical Properties | Milky white or beige uniform emulsion. Good water solubility. The pH value is 5-6. Low temperature resistance and good fluidity. When printing, it does not become sticky and can accommodate a certain amount of electrolyte. The film is tough, soft to the touch, and has good firmness. |
| Use | This product is suitable for use as a pigment printing adhesive for cotton, viscose, silk, polyester, nylon, vinylon, and their blended fabrics. |
This product can be managed according to general industrial chemicals. When using it, gloves and protective glasses should be worn to avoid direct contact with the skin and eyes. If it gets on the skin, rinse with water and soap. Place in a cool and dry warehouse to prevent exposure to sunlight and rain.
Put 10kg of chitin, 4.5kg of acetic acid, and 240L of water into the reaction kettle in sequence. Mix at a high speed of 1440r/s for half an hour. Add 0.5kg of plain and O, stir and mix for 1 hour, and filter with an 18 mesh sieve. When the filtrate is stirred at room temperature, 166kg of styrene butadiene lotion is added at the same time. After stirring for 0.5h, the material is discharged, and then passed through 18 mesh sieve to package the finished product.