64741-64-6
Naphtha (petroleum), full-range alkylate
CAS: 64741-64-6
Molecular Formula:
64741-64-6 - Names and Identifiers
64741-64-6 - Risk and Safety
| Hazard Symbols | T - Toxic |
| Risk Codes | R45 - May cause cancer R65 - Harmful: May cause lung damage if swallowed |
| Safety Description | S53 - Avoid exposure - obtain special instructions before use. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
64741-64-6 - Introduction
Naptha (petroleum), full-range alkylate, is a petroleum alkane with the following properties:
Nature:
-Appearance: Colorless or light yellow liquid
-Density: 0.72-0.78 g/mL
-Melting point:-40 to -50 degrees Celsius
-Boiling point range: about 90-200 degrees Celsius
-Solubility: Soluble in most organic solvents, insoluble in water
Use:
-Fuel additives: naptha (petroleum), full-range alkyl is often used as a gasoline additive, which can increase the octane number of fuel, improve combustion performance, and reduce exhaust emissions.
-Chemical raw materials: It can also be used as a raw material for synthetic chemicals, including dyes, resins and plastics.
-Cleaning agent and solvent: Due to its good solubility, it can be used as a cleaning agent and solvent for cleaning and decontamination.
Preparation Method:
naptha (petroleum), full-range alkylate is prepared by reacting petroleum alkanes with other compounds through Catalyst catalysis. This process involves the use of cracking and reforming reactions at high temperatures and pressures.
Safety Information:
-naptha (petroleum), full-range alkylate is volatile and should be avoided from being exposed to the air for a long time to avoid fire or explosion.
-When using or storing, keep a well-ventilated environment away from open flames and heat sources.
-Avoid contact with strong oxidants to avoid dangerous reactions.
-Appropriate personal protective equipment such as gloves, goggles and protective clothing must be used when handling the compound.
-When using or handling the compound, the safety operation procedures should be strictly observed, and the operation should be carried out in accordance with relevant regulations and standards.
Please note that the use and handling of naptha (petroleum), full-range alkylate should follow safety procedures and refer to the specific safety data sheet provided by the supplier.
Nature:
-Appearance: Colorless or light yellow liquid
-Density: 0.72-0.78 g/mL
-Melting point:-40 to -50 degrees Celsius
-Boiling point range: about 90-200 degrees Celsius
-Solubility: Soluble in most organic solvents, insoluble in water
Use:
-Fuel additives: naptha (petroleum), full-range alkyl is often used as a gasoline additive, which can increase the octane number of fuel, improve combustion performance, and reduce exhaust emissions.
-Chemical raw materials: It can also be used as a raw material for synthetic chemicals, including dyes, resins and plastics.
-Cleaning agent and solvent: Due to its good solubility, it can be used as a cleaning agent and solvent for cleaning and decontamination.
Preparation Method:
naptha (petroleum), full-range alkylate is prepared by reacting petroleum alkanes with other compounds through Catalyst catalysis. This process involves the use of cracking and reforming reactions at high temperatures and pressures.
Safety Information:
-naptha (petroleum), full-range alkylate is volatile and should be avoided from being exposed to the air for a long time to avoid fire or explosion.
-When using or storing, keep a well-ventilated environment away from open flames and heat sources.
-Avoid contact with strong oxidants to avoid dangerous reactions.
-Appropriate personal protective equipment such as gloves, goggles and protective clothing must be used when handling the compound.
-When using or handling the compound, the safety operation procedures should be strictly observed, and the operation should be carried out in accordance with relevant regulations and standards.
Please note that the use and handling of naptha (petroleum), full-range alkylate should follow safety procedures and refer to the specific safety data sheet provided by the supplier.
Last Update：2024-04-09 21:04:16
Supplier List
View History
64741-64-6
(5aS,6R,9R,10S,12R,12aR)-3,6,9-trimethyldecahydro-3,12-epoxy[1,2]dioxepino[4,3-i]isochromen-10-ol
6-nitrophthalhydrazide
Disodium tetracarbonylferrate compound with 1
1-Bromo-2-fluoro-3-iodobenzene
2-(Chloromethyl)-1-fluoro-3-(trifluoromethyl)benzene
7018-07-7
([1,1'-biphenyl]-2-carbonyl)-D-proline
(2S)-7-{[(1-carboxy-2-phenylethyl)amino]sulfonyl}-2,1,3-benzothiadiazol
5-CHLORO-3-METHYL-1-BENZOFURAN-2-CARBOXYLIC ACID
(5aS,6R,9R,10S,12R,12aR)-3,6,9-trimethyldecahydro-3,12-epoxy[1,2]dioxepino[4,3-i]isochromen-10-ol
6-nitrophthalhydrazide
Disodium tetracarbonylferrate compound with 1
1-Bromo-2-fluoro-3-iodobenzene
2-(Chloromethyl)-1-fluoro-3-(trifluoromethyl)benzene
7018-07-7
([1,1'-biphenyl]-2-carbonyl)-D-proline
(2S)-7-{[(1-carboxy-2-phenylethyl)amino]sulfonyl}-2,1,3-benzothiadiazol
5-CHLORO-3-METHYL-1-BENZOFURAN-2-CARBOXYLIC ACID