1-bromo-2,3,6-trifluorobenzene - Names and Identifiers
Name | 1-bromo-2,3,6-trifluorobenzene
|
Synonyms | 2-Bromo-1,3,4-trifL 1,3,4-tifluorobenzene 2,3,6-TRIFLUOROBROMOBENZENE 2-BROMO-1,3,4-TRIFLUOROBENZENE 1-bromo-2,3,6-trifluorobenzene 2-BROMO-1,3,4-trifluorobenzene 1-BROMO-2,3,6-TRIFLUOROBENZENE 3-Bromo-1,2,4-trifluorobenzene Benzene, 2-bromo-1,3,4-trifluoro- 3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,12-henicosafluorododecyl prop-2-enoate
|
CAS | 176793-04-7
|
EINECS | 000-000-0 |
InChI | InChI=1/C6H2BrF3/c7-5-3(8)1-2-4(9)6(5)10/h1-2H |
1-bromo-2,3,6-trifluorobenzene - Physico-chemical Properties
Molecular Formula | C6H2BrF3
|
Molar Mass | 210.98 |
Density | 1.758 |
Boling Point | 151℃ |
Flash Point | 45℃ |
Vapor Presure | 4.7mmHg at 25°C |
Storage Condition | Sealed in dry,Room Temperature |
Refractive Index | 1.4895 |
1-bromo-2,3,6-trifluorobenzene - Risk and Safety
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin.
R36 - Irritating to the eyes
R34 - Causes burns
R25 - Toxic if swallowed
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S27 - Take off immediately all contaminated clothing.
|
Hazard Note | Irritant |
1-bromo-2,3,6-trifluorobenzene - Introduction
1-bromo-2,3,6-trifluorobenzene, chemical formula C6H2BrF3, is an organic compound. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance: 1-bromo-2,3,6-trifluorobenzene is a colorless to pale yellow liquid.
-Density: Its density is about 1.866G/cm3.
-Melting point and boiling point: The melting point is about -43.5 degrees Celsius, and the boiling point is about 133 degrees Celsius.
-Solubility: It can be dissolved in organic solvents, such as ethanol, acetone, etc.
Use:
- 1-bromo-2,3,6-trifluorobenzene can be used as an important reagent and intermediate in organic synthesis, and can be used to synthesize other organic compounds.
-It can also be used as a raw material for pesticides and used to make pesticides.
Method:
- 1-bromo-2,3,6-trifluorobenzene can be obtained by bromination of benzene. First, benzene is reacted with bromine, a catalyst such as cuprous chloride is added, and the reaction is carried out at an appropriate temperature. During the reaction, bromine replaces one hydrogen atom on the benzene ring to produce 2-bromobenzene. Subsequently, a fluorine atom is introduced at positions 3 and 4, and cuprous fluoride can be used as a catalyst.
Safety Information:
- 1-bromo-2,3,6-trifluorobenzene may be toxic to the human body, so it is necessary to take appropriate protective measures when handling and using, such as wearing protective gloves and glasses.
-During storage and transportation, care should be taken to avoid contact with oxidants and combustibles to prevent fires and explosions.
-1-bromo-2,3,6-trifluorobenzene should not be dumped into the environment because it is potentially harmful to the water environment. Local regulations should be followed when disposing of waste.
Last Update:2024-04-10 22:29:15