| PH | 5.0~6.0 |
| Physical and Chemical Properties | The chemical product is a white emulsion. Can be diluted with water, easy to clean with water. Good heat resistance. 80 ℃ after 8 h without stratification,-10 ℃ after 72 h without stratification. After being combined with the paint to form printing paste, it will not deteriorate for more than 15 days. Good stability and liquidity. |
| Use | Uses for fluorescent coatings and white color coating screen printing. Suitable for cotton, silk, polyurethane, synthetic fibers and blends. |
Add 30kg of flat water and O to the reaction kettle, and then add 150kg of distilled water to stir and heat for dissolution. Put 25kg of butyl acrylate, 9kg of methyl methacrylate, and 1kg of acrylamide into a reactor, raise the temperature to about 55 ℃, add 6.8kg of 10% ammonium persulfate aqueous solution dropwise, and react for 0.5h. Then, continue to add 45kg of butyl acrylate, 17kg of butyl methacrylate, 2kg of acrylamide, and 14.2kg of ammonium persulfate aqueous solution at 70-80 ℃. Reaction for 2 hours. Add 20kg601 detergent and stir quickly to emulsify evenly to obtain the finished product.
This product can be managed according to general industrial chemicals. When using it, gloves and protective glasses should be worn to avoid direct contact with the skin and eyes. If it gets on the skin, rinse with water and soap. Place in a cool and dry warehouse to prevent exposure to sunlight and rain.
30 kg of flat plus o is added into the reaction kettle, then 150 kg of distilled water is added, stirred, heated and dissolved. Add 25 kg of butyl acrylate, 9 kg of methyl methacrylate and 1 kg of acrylamide into a reaction kettle, raise the temperature to about 55 ℃, drop 6.8kg of 10% ammonium persulfate aqueous solution, react for 0.5 h, continue to add 45 kg of butyl acrylate, 17 kg of butyl methacrylate, 2 kg of acrylamide and 14.2kg of ammonium persulfate aqueous solution at 70~80 ℃ for 2 h. Add 20kg 601 detergent, quickly stir and emulsify evenly to obtain the finished product.