Piperylene
1,3-Pentadiene
CAS: 504-60-9
Molecular Formula: C5H8
Piperylene - Names and Identifiers
| Name | 1,3-Pentadiene |
| Synonyms | Piperylene Pentadiene-1,3 1,3-Pentadiene Penta-1,3-diene 1-Methylbutadiene rcrawastenumberu186 Rcra waste number U186 |
| CAS | 504-60-9 |
| EINECS | 207-995-2 |
| InChI | InChI=1S/C5H8/c1-3-5-4-2/h3-5H,1H2,2H3 |
Piperylene - Physico-chemical Properties
| Molecular Formula | C5H8 |
| Molar Mass | 68.12 |
| Density | 0.683g/mLat 25°C(lit.) |
| Melting Point | −87°C(lit.) |
| Boling Point | 42°C(lit.) |
| Flash Point | <−30°F |
| Vapor Presure | 6.56 psi ( 20 °C) |
| Vapor Density | 2.4 (vs air) |
| Storage Condition | Refrigerator |
| Stability | Stable. Incompatible with strong oxidizing agents. Very flammable - note low flash point and low boiling point. |
| Refractive Index | n20/D 1.433(lit.) |
| Physical and Chemical Properties | Character: colorless flammable liquid. solubility: insoluble in water, soluble in ethanol and ether |
| Use | Mainly used in the manufacture of polypiperylene resin, also used in organic synthesis |
Piperylene - Risk and Safety
| Risk Codes | R11 - Highly Flammable R65 - Harmful: May cause lung damage if swallowed |
| Safety Description | S16 - Keep away from sources of ignition. S23 - Do not breathe vapour. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S62 - If swallowed, do not induce vomitting; seek medical advice immediately and show this container or label. S24/25 - Avoid contact with skin and eyes. |
| UN IDs | UN 3295 3/PG 2 |
| WGK Germany | 3 |
| RTECS | RZ2465000 |
| Hazard Class | 3.1 |
| Packing Group | I |
Piperylene - Reference Information
| EPA chemical information | Information provided by: ofmpub.epa.gov (external link) |
| Conjugated diene | Interpentadiene (PD) is a very rich conjugated diene in the C5 fraction of petroleum cracking. Because its boiling point is very close to the other components in the C5 fraction, it has been used as a raw material for synthetic petroleum resin or directly as a fuel. Insoluble in water, soluble in ethanol, ether, acetone, benzene. It is irritating to human eyes, skin, mucous membranes and respiratory tract. It is mainly used to make polym-pentadiene resin and also used in organic synthesis. The main industrial use is to produce petroleum resin. Interpentadiene petroleum resin is one of the main uses of interpentadiene, which belongs to one of C5 aliphatic petroleum resins. The main link of this kind of petroleum resin is aliphatic hydrocarbon structure, which has the characteristics of low acid value, good miscibility, good adhesion, water resistance, ethanol resistance and chemical resistance. With the continuous development of m-pentadiene petroleum resin technology, it is widely used in pressure-sensitive adhesives, light-colored hot melt adhesives, light-colored hot melt marker paints, hot melt coatings, rubber tackifiers, paints and printing ink additives. Figure 1 is the structural formula of m-pentadiene. |
| m-pentadiene petroleum resin | m-pentadiene petroleum resin can be divided into the following three types according to different synthetic raw materials: ① polymerization with crude m-pentadiene as the main component, and crude m-pentadiene mainly comes from the remaining fraction (containing m-pentadiene, isoprene, etc.) after the C5 fraction separates cyclopentadiene and C4; ② polymerization with isoprene concentrate as raw material, which is obtained by separating isoprene and cyclopentadiene from C5 fraction. this raw material basically does not contain isoprene and cyclopentadiene; ③ the first two petroleum resin products as the main raw materials are modified to obtain modified isoprene petroleum resin. |
| molecular structure data | molar refractive index: 24.99 molar volume (cm3/mol):99.7 isotonic specific volume (90.2K):207.2 surface tension (dyne/cm):18.6 polarizability (10-24cm3):2.85 |
| Use | Mainly used to make polym-pentadiene resin, and also used in organic synthesis |
| category | harmful gases |
| toxicity classification | poisoning |
| acute toxicity | inhalation-rat LC50:140g/cubic meter/2 hours; Inhalation-mouse LC50:1100 mg/m3/2 hours |
| flammability hazard characteristics | it is combustible when heated, open flame, and strong oxidant; combustion produces stimulating smoke |
| storage and transportation characteristics | warehouse ventilation and low temperature drying; Light loading and light unloading, separate from oxidant and acid storage |
| fire extinguishing agent | mist water, foam, carbon dioxide |
| toxic substance data | information provided by: pubchem.ncbi.nlm.nih.gov (external link) |
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: 13-PENTADIENE Visit Supplier Webpage Request for quotationCAS: 504-60-9
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185
Wechat: chinaskyrun
Spot supply
Product Name: 13-PENTADIENE Visit Supplier Webpage Request for quotationCAS: 504-60-9
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185
Wechat: chinaskyrun
View History