ChemBK
  • Home
  • Product Category


Formylmelphalan

Phosphorous oxybromide

CAS: 7789-59-5

Molecular Formula: Br3OP

  1. Home
  2. Product Category
  3. Inorganic chemical engineering
  4. inorganic salt
  5. Formylmelphalan

Formylmelphalan - Names and Identifiers

Name Phosphorous oxybromide
Synonyms Formylmelphalan
phosphoryl bromide
phosphoryltribromide
phosphorictribromide
Phosphorus(V) oxybro
phosphoryl tribromide
Phosphorus(V) oxybroM
Phosphorus oxybromide
Phosphoric tribromide
Phosphorous oxybromide
phosphorus oxide bromide
phosphorus(v) oxybromide
phosphorustribromideoxide
phosphorus oxide tribromide
phosphorus(v)tribromideoxide
phosphorus(v) tribromide oxide
Phosphoryl bromide for synthesis
Phosphoryl TribroMide (Phosphorus oxybroMide)
CAS 7789-59-5
EINECS 232-177-7
InChI InChI=1/Br3OP/c1-5(2,3)4
InChIKey UXCDUFKZSUBXGM-UHFFFAOYSA-N

Formylmelphalan - Physico-chemical Properties

Molecular FormulaBr3OP
Molar Mass286.69
Density2.82g/mLat 25°C(lit.)
Melting Point56°C(lit.)
Boling Point192°C(lit.)
Flash Point189°C
Water Solubilitydecomposes
Vapor Presure0.786mmHg at 25°C
AppearanceLump
Specific Gravity2.822
ColorWhite to yellow
Merck14,7348
Storage ConditionStore below +30°C.
SensitiveMoisture Sensitive
Refractive Index1.613
Physical and Chemical Properties

Appearance of colorless or light orange crystals, with irritating odor
relative density 2.822
melting point 56 ℃
boiling point 191.7 ℃
heat of vaporization 38 Kj/mol
flash point 189 ℃
water solubility soluble in ether, benzene, chloroform, carbon disulfide, concentrated sulfuric acid. Slow hydrolysis in water to phosphoric acid and HBr

UseIt is used as an intermediate in chemical processing and as a raw material for the manufacture of brominated flame retardants.

Formylmelphalan - Risk and Safety

Hazard SymbolsC - Corrosive
Corrosive
Risk CodesR14 - Reacts violently with water
R34 - Causes burns
R37 - Irritating to the respiratory system
Safety DescriptionS26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S43 - In case of fire use ... (there follows the type of fire-fighting equipment to be used.)
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S7/8 -
SNeverusewater. -
UN IDsUN 1939 8/PG 2
WGK Germany3
FLUKA BRAND F CODES10-21
TSCAYes
HS Code28129090
Hazard NoteCorrosive
Hazard Class8
Packing GroupII

Formylmelphalan - Nature

Open Data Verified Data

colorless or light orange crystals with irritating odor. The relative density was 2. 822. Melting point 56 °c. Boiling point 191.7 °c. The heat of vaporization was 38kJ/mol. Soluble in ether, benzene, chloroform, carbon disulfide, concentrated sulfuric acid. Slow hydrolysis in water to phosphoric acid and HBr.

Last Update:2025-06-10 22:55:16

Formylmelphalan - Preparation Method

Open Data Verified Data
  1. phosphorus oxychloride method: phosphorus oxychloride is used as raw material, aluminum trichloride is used as catalyst, heating, and hydrogen bromide gas is introduced to react at a temperature of about 80 ° C. To obtain phosphorus oxybromide. The hydrogen chloride gas generated by the reaction is absorbed by water to generate dilute hydrochloric acid.
  2. phosphorus tribromide process: in a round-bottom flask equipped with a mill-orifice reflux condenser, add a mixture of phosphorus pentaboride and phosphorus pentoxide (250g PBrs/approximately 30g P2 05), it was slowly heated to 150 ℃, and phosphorus pentoxide was slightly more than phosphorus pentabromide according to stoichiometry. At this time, the reaction was terminated within 5h while removing bromine. Next, lOg of bromine and an equivalent amount of phosphorus pentoxide were added to the melt and refluxed at 150 °c for several hours. This is due to the time required for the oxidation of the intermediate phosphorus tribromide to phosphorus pentabromide and for the conversion to phosphorus tribromide. The resultant was subjected to vacuum distillation under reduced pressure. After the bromine of the initial fraction and the phosphorus tribromide contained therein are removed, trapping is performed. The receiver was cooled with ice-saline. Phosphorus tribromo was prepared.
Last Update:2022-01-01 11:02:43

Formylmelphalan - Application

Open Data Verified Data

It is used as an intermediate in a chemical process and as a raw material for producing a bromine-based flame retardant.

Last Update:2025-08-19 16:24:40

Formylmelphalan - Safety

Open Data Verified Data

risk code: acid corrosion product, GB8, Class 1 81055. UN No. 2576 (molten);IMDG CODE P. 8206, 8, category 1. Glass bottles or polyethylene plastic bottles, each bottle of net weight 500g, and then concentrated in the wood box liner, or metal barrel lined with plastic bags, net weight 25kg per barrel. The package should be marked with "drug" and "corrosive substances. Store in a cool, dry, well-ventilated warehouse. Isolation storage and transportation of combustible materials, especially fibrous organic matter. Keep away from electrical equipment to avoid corrosion. Take precautions against damp. Light load and light discharge during handling to prevent damage to the container. Fire, dry sand, dry powder can be used to extinguishing. Fire of nearby combustibles can be put out with water, but the direct flow of water to the phosphorus tribromo must be prevented. It has similar toxicity to phosphorus oxychloride. It reacts with water and emits white, smoky, irritating and corrosive hydrogen bromide gas, which is strongly irritating to the eyes, mucous membranes and skin. Patients who inhale vapor or smoke should be removed from the contaminated area, placed to rest and kept warm. The patient has eye irritation and is flushed with water. Skin contact first rinse with water, then wash thoroughly with soap. If there is a burn, see a doctor for diagnosis and treatment. The patient was immediately sent to the hospital for treatment.

Last Update:2025-06-10 22:55:16

Formylmelphalan - Reference Information

NIST chemical information information provided by: webbook.nist.gov (external link)
EPA chemical substance information information provided by: ofmpeb.epa.gov (external link)
Introduction phosphorus oxybromide is a colorless or light orange crystal with pungent odor, soluble in ether, benzene, chloroform, carbon disulfide, concentrated sulfuric acid. Slow hydrolysis in water to phosphoric acid and HBr. Phosphorus oxybromide is used as an intermediate in chemical processing and as a raw material for the manufacture of brominated flame retardants.
toxicity has toxicity similar to that of phosphorus oxychloride. It reacts with water and emits white, smoky, irritating and corrosive hydrogen bromide gas, which is strongly irritating to the eyes, mucous membranes and skin. Patients who inhale vapor or smoke should be removed from the contaminated area, placed to rest and kept warm. The patient has eye irritation and is flushed with water. Skin contact first rinse with water, then wash thoroughly with soap, if there is a burn treatment. The patient was immediately sent to the hospital for treatment.
Use is used as an intermediate in chemical processing and as a raw material for the manufacture of brominated flame retardants.
production method phosphorus oxychloride method with phosphorus oxychloride as raw material, aluminum chloride as catalyst, heated at about 80 ℃, hydrogen bromide gas was introduced into the reaction to obtain tribromophosphorus. The hydrogen chloride gas generated by the reaction of POC13 3HBr → POBr3 3HCl is absorbed by water to generate dilute hydrochloric acid. Phosphorus tribromide method a mixture of phosphorus pentabromide and phosphorus pentoxide (250 gPBr5/about 30 gP2O5) was added to a round-bottom flask equipped with a mill-orifice reflux condenser and slowly heated to 150 °c, the amount of phosphorus pentoxide was slightly higher than that of phosphorus pentabromide according to stoichiometry. At this time, the reaction was terminated within 5h while removing the bromine. Next, 10g of bromine and an equivalent amount of phosphorus pentoxide were added to the melt and refluxed at 150 ° C. For several hours. This is due to the time required for the oxidation of the intermediate phosphorus tribromide to phosphorus pentabromide and for the conversion to phosphorus tribromide. The resultant was subjected to vacuum distillation under reduced pressure. After the bromine of the initial fraction and the phosphorus tribromide contained therein are removed, trapping is performed. The receiver was cooled with ice-saline. Phosphorus tribromo was prepared. 3PBr5 P2O5 → 5POBr3
category corrosive article
flammability hazard characteristics toxic hydrogen bromide gas generated by water decomposition
storage and transportation characteristics The warehouse is ventilated and dried at low temperature; Stored separately from combustible materials
extinguishing agent dry powder
toxic substance data information provided by: pubchem.ncbi.nlm.nih.gov (external link)
Last Update:2024-04-10 22:29:15
Formylmelphalan
Supplier List
CHEMBSF (Shanghai) Biomedical Technology Co., Ltd
Spot supply
Product Name: Phosphorous oxybromide Request for quotation
CAS: 7789-59-5
Tel: 021-60556179
Email: 18721521379@163.com
Mobile: +86-18721521379
Wechat: 18721521379
JIANGSU BSECHEM CHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: Phosphorous oxybromide Request for quotation
CAS: 7789-59-5
Tel: +86-17505207175
Email: 3787852685@qq.com
Mobile: +86-17505207175
QQ: 3787852685 Click to send a QQ message
Wechat: chemical6666
Nantong Reform Petro-Chemical CO., LTD.
Spot supply
Product Name: Phosphorous oxybromide Request for quotation
CAS: 7789-59-5
Tel: +86-13776910623
Email: r@reformchem.com­
Mobile: +86-13776910623
QQ: 3785839865 Click to send a QQ messageSend QQ message
Wechat: chemical6666 
Guangzhou Yuanda New Material Co.,Ltd
Product Name: Phosphorus oxybromide Request for quotation
CAS: 7789-59-5
Tel: +86 19849939632
Email: 2470479589@qq.com
Mobile: +86 19849939632
QQ: 2470479589 Click to send a QQ message
Shanghai Amole Biotechnology Co., Ltd.
Spot supply
Product Name: Phosphorus oxybromide Visit Supplier Webpage Request for quotation
CAS: 7789-59-5
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365 Click to send a QQ message
Wechat: 18916960931
SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: Phosphorus(V) oxybromide Visit Supplier Webpage Request for quotation
CAS: 7789-59-5
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922 Click to send a QQ message
Wechat: 18621343501
WhatsApp: +86-18621343501
SKYRUN INDUSTRIAL CO.,LTD
Spot supply
Product Name: Phosphorus oxybromide Visit Supplier Webpage Request for quotation
CAS: 7789-59-5
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
Hefei TNJ Chemical Industry Co.,Ltd.
Product Name: Phosphorous oxybromide Request for quotation
CAS: 7789-59-5
Tel: 0086-551-65418684
Email: sales@tnjchem.com
     info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840 Click to send a QQ message
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
CHEMBSF (Shanghai) Biomedical Technology Co., Ltd
Spot supply
Product Name: Phosphorous oxybromide Request for quotation
CAS: 7789-59-5
Tel: 021-60556179
Email: 18721521379@163.com
Mobile: +86-18721521379
Wechat: 18721521379
JIANGSU BSECHEM CHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: Phosphorous oxybromide Request for quotation
CAS: 7789-59-5
Tel: +86-17505207175
Email: 3787852685@qq.com
Mobile: +86-17505207175
QQ: 3787852685 Click to send a QQ message
Wechat: chemical6666
Nantong Reform Petro-Chemical CO., LTD.
Spot supply
Product Name: Phosphorous oxybromide Request for quotation
CAS: 7789-59-5
Tel: +86-13776910623
Email: r@reformchem.com­
Mobile: +86-13776910623
QQ: 3785839865 Click to send a QQ messageSend QQ message
Wechat: chemical6666 
Guangzhou Yuanda New Material Co.,Ltd
Product Name: Phosphorus oxybromide Request for quotation
CAS: 7789-59-5
Tel: +86 19849939632
Email: 2470479589@qq.com
Mobile: +86 19849939632
QQ: 2470479589 Click to send a QQ message
Shanghai Amole Biotechnology Co., Ltd.
Spot supply
Product Name: Phosphorus oxybromide Visit Supplier Webpage Request for quotation
CAS: 7789-59-5
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365 Click to send a QQ message
Wechat: 18916960931
SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: Phosphorus(V) oxybromide Visit Supplier Webpage Request for quotation
CAS: 7789-59-5
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922 Click to send a QQ message
Wechat: 18621343501
WhatsApp: +86-18621343501
SKYRUN INDUSTRIAL CO.,LTD
Spot supply
Product Name: Phosphorus oxybromide Visit Supplier Webpage Request for quotation
CAS: 7789-59-5
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
Hefei TNJ Chemical Industry Co.,Ltd.
Product Name: Phosphorous oxybromide Request for quotation
CAS: 7789-59-5
Tel: 0086-551-65418684
Email: sales@tnjchem.com
     info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840 Click to send a QQ message
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
View History
Formylmelphalan
  • Home
  • Product Category

© 2015, 2023 ChemBK.com All Rights Reserved | Build: 20230617001