329735-72-0
Tris(methylcyclopentadienyl)yttrium
CAS: 329735-72-0
Molecular Formula: C18H9Y
329735-72-0 - Names and Identifiers
329735-72-0 - Physico-chemical Properties
| Molecular Formula | C18H9Y |
| Molar Mass | 314.18 |
| Water Solubility | Insoluble in water. |
| Appearance | crystal |
| Color | yellow |
| Storage Condition | Room Temprature |
| Sensitive | Air & Moisture Sensitive |
| MDL | MFCD00145485 |
329735-72-0 - Risk and Safety
| UN IDs | UN3181 |
| Hazard Class | 4.1 |
| Packing Group | III |
329735-72-0 - Introduction
Tris(methylcyclopentadienyl)yttrium, also known as tris (methylcyclopentadiene) trimethylyttrium, is an organometallic compound formed from yttrium, methylcyclopentadiene. The following is a description of the properties, uses, preparation and safety information of the compound:
Nature:
1. Appearance: Tris(methylcyclopentadienyl)yttrium is a colorless to light yellow solid.
2. Melting point: about 100-200°C.
3. Solubility: Soluble in common organic solvents, such as toluene, dimethylformamide, etc.
4. Stability: The compound is sensitive to oxygen and moisture and should be stored under an inert atmosphere.
Use:
1. Catalyst: Tris(methylcyclopentadienyl)yttrium is used as a catalyst in organic synthesis reactions, such as alkylation reactions of halogenated hydrocarbons and C- C bond formation reactions.
2. Material preparation: The compound can be used to prepare specific materials such as organometallic polymers and metal organic compounds.
3. Preparation of YBa2Cu3O7 superconductors: Tris(methylcyclopentadienyl)yttrium can also be used as a precursor material for YBa2Cu3O7 superconductors.
Preparation Method:
Tris(methylcyclopentadienyl)yttrium can be prepared by the following methods:
1. Reaction method: Yttrium metal and methylcyclopentadiene are reacted in an organic solvent such as dimethylformamide or toluene.
2. Thermal cracking method: the precursor compound of Tris(methylcyclopentadienyl)yttrium is decomposed by heating at high temperature.
Safety Information:
1. Tris(methylcyclopentadienyl)yttrium may cause potential harm to the environment and should comply with environmental protection regulations.
2. When handling this compound, it is necessary to follow routine laboratory safety measures, such as wearing protective gloves, goggles and laboratory coats.
3. This compound can produce toxic smoke and gas during heating, and the reaction should be carried out in a well-ventilated environment.
Please note that before using Tris(methylcyclopentadienyl)yttrium or any organometallic compound, please refer to the official literature and relevant safety materials, and consult professional guidance and advice.
Nature:
1. Appearance: Tris(methylcyclopentadienyl)yttrium is a colorless to light yellow solid.
2. Melting point: about 100-200°C.
3. Solubility: Soluble in common organic solvents, such as toluene, dimethylformamide, etc.
4. Stability: The compound is sensitive to oxygen and moisture and should be stored under an inert atmosphere.
Use:
1. Catalyst: Tris(methylcyclopentadienyl)yttrium is used as a catalyst in organic synthesis reactions, such as alkylation reactions of halogenated hydrocarbons and C- C bond formation reactions.
2. Material preparation: The compound can be used to prepare specific materials such as organometallic polymers and metal organic compounds.
3. Preparation of YBa2Cu3O7 superconductors: Tris(methylcyclopentadienyl)yttrium can also be used as a precursor material for YBa2Cu3O7 superconductors.
Preparation Method:
Tris(methylcyclopentadienyl)yttrium can be prepared by the following methods:
1. Reaction method: Yttrium metal and methylcyclopentadiene are reacted in an organic solvent such as dimethylformamide or toluene.
2. Thermal cracking method: the precursor compound of Tris(methylcyclopentadienyl)yttrium is decomposed by heating at high temperature.
Safety Information:
1. Tris(methylcyclopentadienyl)yttrium may cause potential harm to the environment and should comply with environmental protection regulations.
2. When handling this compound, it is necessary to follow routine laboratory safety measures, such as wearing protective gloves, goggles and laboratory coats.
3. This compound can produce toxic smoke and gas during heating, and the reaction should be carried out in a well-ventilated environment.
Please note that before using Tris(methylcyclopentadienyl)yttrium or any organometallic compound, please refer to the official literature and relevant safety materials, and consult professional guidance and advice.
Last Update：2024-04-09 15:18:01
Supplier List
Spot supply
Product Name: Tris(methylcyclopentadienyl)yttrium Request for quotationCAS: 329735-72-0
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365
Wechat: 18916960931
Product Name: Tris(Methylcyclopentadienyl)Yttrium(Iii) (Reo) Visit Supplier Webpage Request for quotation
CAS: 329735-72-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
CAS: 329735-72-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Spot supply
Product Name: Tris(methylcyclopentadienyl)yttrium Request for quotationCAS: 329735-72-0
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365
Wechat: 18916960931
Product Name: Tris(Methylcyclopentadienyl)Yttrium(Iii) (Reo) Visit Supplier Webpage Request for quotation
CAS: 329735-72-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
CAS: 329735-72-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
View History