1427-06-1 - Names and Identifiers
1427-06-1 - Physico-chemical Properties
| Molecular Formula | C7H6FNO2
|
| Molar Mass | 155.13 |
| Density | 1.243±0.06 g/cm3(Predicted) |
| Melting Point | 48-52°C |
| Boling Point | 210.3±20.0 °C(Predicted) |
| Flash Point | 99°C |
| Vapor Presure | 0.194mmHg at 25°C |
| Appearance | Solid |
| pKa | -2.47±0.10(Predicted) |
| Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
| Refractive Index | 1.491 |
| MDL | MFCD03095098 |
1427-06-1 - Risk and Safety
| Hazard Symbols | Xn - Harmful

|
| Risk Codes | R22 - Harmful if swallowed
R41 - Risk of serious damage to eyes
|
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
|
| WGK Germany | 3 |
| HS Code | 29333990 |
1427-06-1 - Introduction
Methyl 6-fluorumicotinate, chemical formula C8H7FO3, is an organic compound. The following is a description of the properties, uses, preparation methods and safety information of methyl 6-fluorumicotinate:
Nature:
-Methyl 6-fluoronicotinate is a colorless liquid with a special smell.
-Its melting point is about -2°C, boiling point is about 164°C, and its relative density is about 1.36g/cm³.
-Methyl 6-fluoronicotinate is insoluble in water and soluble in some organic solvents such as ethanol and dichloromethane.
-It is a relatively stable compound, but it may degrade under light, heat, oxidants and strong acids.
Use:
-Methyl 6-fluoronicotinate can be used as an important intermediate in organic synthesis.
-It is commonly used in the preparation of pesticides, pharmaceuticals and dyes and other organic compounds.
Methyl 6-fluoronicotinate can also be used as a fluorination reagent, catalyst, solvent, etc. in organic synthesis reactions.
Preparation Method:
-The preparation of methyl 6-fluoricotinate is generally obtained by reacting ethyl acetate with hydrogen fluoride.
-The reaction conditions are generally required to be carried out at a low temperature, and a catalyst is used to promote the reaction.
Safety Information:
-Methyl 6-fluorumicotinate is an organic compound, and attention should be paid to the safe handling of chemicals.
-It is a flammable liquid and should be kept away from open flames and high temperature sources and stored in a closed container.
-Use with care to avoid contact with skin, eyes and respiratory tract.
-Use appropriate personal protective equipment such as gloves, safety glasses and protective masks when handling.
-In the event of a leak, appropriate emergency measures should be taken immediately to clean up and dispose of it.
Last Update:2024-04-09 02:00:42