Molecular Formula | C2H5O6P |
Molar Mass | 156.03 |
Density | 1.37 (50% aq.) |
Boling Point | 557.7±60.0 °C(Predicted) |
Flash Point | 135°C |
Vapor Presure | 0.000278mmHg at 25°C |
pKa | 2.05±0.10(Predicted) |
Storage Condition | -20°C |
Physical and Chemical Properties | Density 1.37 (50% aq.) |
Use | Widely used in steel, petrochemical, electric power, pharmaceutical and other industries of circulating cooling water system scale inhibition, corrosion inhibition, suitable for low hardness water quality in southern China; HPAA can be widely used in steel, petrochemical, electric power, the scale inhibition and corrosion inhibition of circulating cooling water system in medicine and other industries are generally compounded with zinc salt to form corrosion inhibitor, which is suitable for low hardness water quality in Southern China and has scale inhibition effect. |
Hazard Symbols | C - Corrosive |
Risk Codes | R22 - Harmful if swallowed R34 - Causes burns R43 - May cause sensitization by skin contact R48/22 - Harmful danger of serious damage to health by prolonged exposure if swallowed. |
Safety Description | S1/2 - Keep locked up and out of the reach of children. S22 - Do not breathe dust. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
UN IDs | UN 3265 |
Hazard Class | 8 |
Packing Group | II |
Raw Materials | Phosphorous acid Glyoxylic acid |
white crystals with a phosphorus content of 19.8% and a melting point of 165-167.5 °c. The pH value of 1% aqueous solution is 1, which can be miscible with water in any proportion.
used as corrosion inhibitor. HPAA has excellent corrosion inhibition performance, especially for low hardness, low alkalinity, strong corrosive water, showing a strong corrosion inhibition. HPAA has a good chelating effect with divalent ions, which can be used as a metal ion stabilizer to effectively stabilize Fe2, Fe3, Mn2 and Al3 plasma in water and reduce corrosion and scaling; HPAA can significantly reduce the deposition of calcium carbonate and silicon dioxide, and has good scale inhibition performance, but the scale inhibition performance of HPAA on calcium sulfate scale is slightly poor. In order to avoid the decomposition of HPAA by the oxidizing bactericide, the protective agent can be used, but the residual chlorine (0.5~1-0 mg/L) is less affected in the intermittent chlorination cooling water system. The combination of HPAA and zinc salt has obvious synergistic corrosion inhibition effect. The recommended concentration is generally 5 to 30mg/L. Acid corrosion resistance shall be provided for each medicine.
rat oral LD50: 2700mg/kg. Corrosive, the staff should be protected to avoid swallowing or contact with the body. The workplace should be well ventilated. If contact with the skin, eyes, immediately rinse with plenty of water. This product is difficult to be biodegraded, and attention should be paid to the influence on water body. Store in a cool and ventilated place to avoid direct sunlight exposure. It cannot be co-stored and co-transported with strong alkali, nitrite or sulfite. During long-term storage, the pressure should be periodically released due to the release of carbon dioxide from impurities contained therein.