dl-2-amino-1-hexanol - Names and Identifiers
dl-2-amino-1-hexanol - Physico-chemical Properties
Molecular Formula | C6H15NO
|
Molar Mass | 117.19 |
Density | 0.912g/mLat 25°C(lit.) |
Melting Point | 28.94°C (estimate) |
Boling Point | 190-192°C740mm Hg(lit.) |
Flash Point | 212°F |
Vapor Presure | 0.135mmHg at 25°C |
Refractive Index | n20/D 1.4522(lit.) |
dl-2-amino-1-hexanol - Risk and Safety
Hazard Symbols | Xi - Irritant
|
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S37/39 - Wear suitable gloves and eye/face protection
|
WGK Germany | 3 |
dl-2-amino-1-hexanol - Introduction
dl-2-amino-1-hexanol is an organic compound with the chemical formula C6H15NO. It is a solid, colorless or pale yellow, with a peculiar smell of amino alcohol. Here are details about the compound:
Nature:
dl-2-amino-1-hexanol is a hydrophobic compound that is soluble in water and organic solvents, such as alcohols and ethers. It is hygroscopic and reacts with moisture in the air, oxidizing or decomposing.
Use:
dl-2-amino-1-hexanol have a variety of uses in chemical synthesis. It can be used as an intermediate in organic synthesis for the preparation of various organic compounds, such as drugs, pesticides, dyes and surfactants. In addition, it is also used in the preparation of polyurethane and other polymer materials.
Preparation Method:
dl-2-amino-1-hexanol can be prepared by hydrogenation reaction of hydrogen cyanide. The specific process is that hydrogen cyanide is added to a mixture of cyclohexanone and ammonia water, and then the target product can be obtained by reduction treatment.
Safety Information:
dl-2-amino-1-hexanol has low toxicity under normal use conditions, but it is still necessary to pay attention to safe operation. Contact with skin, eyes or inhalation of vapors may cause irritation and direct contact should be avoided. When in use, wear appropriate protective equipment such as gloves, goggles and laboratory coats to ensure good ventilation. When storing, it should be stored in a dry, cool place, away from fire and oxidizing agents. When disposing of waste, it should be disposed of in accordance with local regulations.
Last Update:2024-04-09 20:52:54