Name | 2-bromo-5-chloroaniline |
Synonyms | 2-Brom-5-chloranilin Bromo-5-chloroaniline 2-bromo-5-chloroaniline 2-BROMO-5-CHLOROANILINE 2-BROMO-5-CHLOROBENZENAMINE BenzenaMine,2-broMo-5-chloro- benzenamine, 2-bromo-5-chloro- |
CAS | 823-57-4 |
InChI | InChI=1/C6H5BrClN/c7-5-2-1-4(8)3-6(5)9/h1-3H,9H2 |
InChIKey | NLEZSQHAFMZAGU-UHFFFAOYSA-N |
Molecular Formula | C6H5BrClN |
Molar Mass | 206.47 |
Density | 1.722±0.06 g/cm3(Predicted) |
Melting Point | 38 °C |
Boling Point | 128 °C / 7mmHg |
Flash Point | 114.5°C |
Solubility | soluble in Methanol |
Vapor Presure | 0.00897mmHg at 25°C |
Appearance | powder to lump |
Color | White to Brown |
pKa | 1.48±0.10(Predicted) |
Storage Condition | under inert gas (nitrogen or Argon) at 2–8 °C |
Refractive Index | 1.638 |
MDL | MFCD00672942 |
Hazard Symbols | Xi - Irritant |
Risk Codes | R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. R36/37/38 - Irritating to eyes, respiratory system and skin. |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. |
HS Code | 29214200 |
Hazard Note | Irritant |
Overview | 2-bromo-5-chloroaniline chemical formula c6brh5cln, which is useful as a synthesis intermediate in the pharmaceutical chemical industry. |
safety note | if inhaling 2-bromo-5-chloroaniline, move the patient to fresh air; if the skin is in contact, take off the contaminated clothing and rinse the skin thoroughly with soap and water. If you feel uncomfortable, seek medical advice, and immediately see a doctor; If you eat, immediately gargle, prohibit emetic, should immediately see a doctor. The advice to protect the rescuer is as follows: transfer the patient to a safe place, Counseling doctor, if conditions permit, please show the chemical safety technical instructions to the doctor on the spot. In case of leakage, a small amount of leakage shall be collected as far as possible in a container that can be sealed, absorbed by sand, activated carbon or other inert materials, and transferred to a safe place, and shall not be flushed into the sewer; if there is a large amount of leakage, the embankment or excavation pit shall be constructed, the drainage pipes shall be closed, covered with foam to inhibit evaporation, transferred to the tank car or special collector by means of explosion-proof pump, recovered or transported to the waste treatment site for disposal. |