Molecular Formula | C33H56N4OS2 |
Molar Mass | 588.95 |
Density | 1.07±0.1 g/cm3(Predicted) |
Melting Point | 92-95 °C |
Boling Point | 670.7±65.0 °C(Predicted) |
Flash Point | 359.4°C |
Solubility | Chloroform (Slightly), Methanol (Slightly) |
Vapor Presure | 1.33E-18mmHg at 25°C |
Appearance | Solid |
Color | White to Off-White |
pKa | 12.27±0.70(Predicted) |
Storage Condition | Keep in dark place,Inert atmosphere,Room temperature |
Refractive Index | 1.558 |
LogP | 13.2 at 25℃ |
EPA chemical substance information | information provided by: ofmpeb.epa.gov (external link) |
polymer multi-functional hindered phenolic antioxidant | Antioxidant 565 is a polymer multi-functional hindered phenolic antioxidant, it is mainly applied to the post-processing stable treatment of unsaturated rubber, which is very effective for elastomer, and can protect the material from thermal oxidation degradation during production, processing and final use. It is an excellent antioxidant and photothermal stabilizer for a variety of resins, with small addition amount, low volatility, high color fastness, and can prevent the formation of gel. very effective for use in the following elastomers: cis-Polybutadiene Rubber (BR) Isoprene Rubber (IR) Styrene-Butadiene Rubber (SBR) Nitrile Rubber (NBR) carboxyl styrene-butadiene latex (XSBR) emulsion polymerized styrene-butadiene rubber (ESBR) solution polymerized styrene-butadiene rubber (SSBR) thermoplastic styrene-butadiene rubber SBS thermoplastic styrene-butadiene rubber SIS In addition, it can also be used in adhesives, natural and synthetic resins, such as ethylene-propylene-diene monomer (EPDM),ABS plastic, polyamide (nylon, PA), High Impact Polystyrene (HIPS) and polyolefin. ABS plastic is A modified polystyrene plastic, which is composed of three components based on acrylonitrile (A), butadiene (B) and styrene (S). ABS plastic can be made with patterns of plastic decorative panels and so on. |
Antioxidant | An antioxidant is an organic compound that inhibits or retards the thermal oxidation of polymers and other organic compounds in air. In general, it is very effective to add only 1% of an antioxidant in a small concentration. For example, food products are susceptible to Oxidative deterioration, and a small amount of an antioxidant may be added to prolong their storage time. Plastics, synthetic fibers and rubber and other polymer materials are prone to thermal oxidation degradation reaction, and the addition of antioxidant can maintain the excellent performance of polymer materials and prolong the service life. The addition of the antioxidant is better closer to the aging cycle, for example before the polymer is dried into a powder. Antioxidant PL-440 is a phosphite antioxidant with excellent performance, which can be used as antioxidant and heat stabilizer of high polymer, widely used in PVC, PET, ABS, polyolefin, nylon, PPO, PBT alloy, polystyrene and its other polymers. It can effectively improve the light stability, processing stability, mechanical strength, color stability and transparency of the product, and prolong the life of the product. PL-440 has the special function of stabilizing the melt viscosity of high polymer. The product is non-toxic and can be used in food packaging materials. |
Antioxidant 1010 | Antioxidant 1010 is a macromolecular multifunctional hindered phenolic antioxidant, soluble in benzene, acetone, chloroform, insoluble in water. No pollution, no coloring, small volatility, good resistance to extraction. Widely used in polyethylene, polypropylene, polyoxymethylene, ABS resin, PS resin, PVC, plastic, rubber and petroleum products, polypropylene, polyethylene has excellent oxidation resistance. The service life of the article can be effectively extended. 1, with the auxiliary antioxidant DLTDP, antioxidant 168 and used in polypropylene resin, can significantly improve its thermal stability, is one of the most excellent varieties of phenolic antioxidants. 2, the general dosage is 0.1% ~ 0.5%, with the restriction of environmental protection regulations in foreign developed regions, the original tin products will gradually over to Wuxi products. 3, non-toxic, non-flammable, non-explosive, non-corrosive, good storage stability. |
Antioxidant 168 | Antioxidant 168 is an excellent phosphite Antioxidant with white powder appearance, soluble in benzene, chloroform, cyclohexane and other organic solvents, slightly soluble in ethanol, acetone, insoluble in water, alcohol and other polar solvents, slightly soluble in esters. Low toxicity, low volatility, high thermal stability , excellent hydrolysis resistance, can effectively decompose hydroperoxide produced in the thermal processing of polymeric materials. It has a good synergistic effect with Hindered amine antioxidant 1010 and 1076, and can improve the stability of the polymer material during thermal processing. With phenolic antioxidant compound preparation has reached more than ten, widely used in polyolefin (such as polyethylene, polypropylene) and olefin copolymer, polyamide, polycarbonate, PS resin, PVC, engineering plastics, rubber and stone oil products, ABS resin and other polymer materials. The compound can also be used for adhesives, natural or synthetic adhesive resins, etc. The general dosage is 0.1% ~ 1.0%. |
Antioxidant 264 | Antioxidant 264 is an excellent general-purpose phenolic Antioxidant, non-toxic, non-flammable, no corrosion, good storage stability, can inhibit or delay the oxidative degradation of plastic or rubber and prolong service life. Appearance is white or light yellow crystalline powder, soluble in benzene, toluene, methanol, ethanol, acetone, carbon tetrachloride, acetic acid, oil, ethyl ester and gasoline and other solvents, insoluble in water and dilute caustic soda solution. It is an excellent antioxidant additive for various petroleum products. It is widely used in various lubricating oils, gasoline, paraffin and various raw oils to prevent the increase of acid value or viscosity of lubricating oil and fuel oil. In food-grade plastics and packaged foods as food antioxidants, Stabilizers can delay the rancidity of food. Can also be used for polyethylene (PE), polystyrene (PS), PP (polypropylene), polyvinyl chloride, ABS resin, polyester, cellulose resin and foam plastics (especially white or light-colored products), food-grade plastics, natural rubber, synthetic rubber (styrene-butadiene, nitrile, polyurethane, cis butadiene rubber, etc.), animal and vegetable fats and oils as well as animal and vegetable fats and oils containing food, cosmetics and other products. Reference dosage is generally 0.1%-1.0%. |
Antioxidant 1076 | Antioxidant 1076 is a non-polluting non-toxic hindered phenolic antioxidant, appearance of white or yellowish solid powder, soluble in benzene (57g), chloroform, cyclohexane, acetone (19g) and esters and other organic solvents, slightly soluble in methanol, ethanol, mineral oil, insoluble in water, light stable, not easy to change color, no pollution, no coloring, low volatility, water extraction resistance, good compatibility, high antioxidant efficiency, widely used in polyethylene, polypropylene, polyoxymethylene, ABS resin, polystyrene, polyvinyl chloride , engineering plastics, synthetic fibers, elastomers, adhesives, waxes, synthetic rubber and petroleum products. Prevents thermal oxidative degradation of the substrate. Addition is suitable at the stage of polymerization, production or end-use of the product. Often with the auxiliary antioxidant agent DLTP,168 and so on and play a synergistic effect, the antioxidant performance is better, the general dosage is 0.1% ~ 0.5%. |
Antioxidant 1024 | Antioxidant 1024 is a kind of antioxidant with excellent performance, soluble in methanol and acetone, slightly soluble in chloroform and ethyl acetate, insoluble in water, has the double structure of hindered phenol and hydrazide, and has the function of antioxidation and metal deactivation. It is a Metal deactivator, which does not produce color stain, and can be used alone or in combination with other general antioxidants, and has excellent synergistic effect. Suitable for polyethylene, polypropylene, polystyrene, polyamide, polyester, especially suitable for phenolic resin antioxidant agent, can effectively prevent the polymer due to the transition metal ions (such as catalyst residues) caused by the presence of self oxidation. |